The default password for the program is 1234

Software is the management, communication and control of smart devices of places

It is a multi-purpose device that has the ability to work industrially and at home.

With this program, you will be able to send the necessary commands to control the smart device and at the same time, receive the relevant response from the device and view it on the software.

You can also receive various events and happenings at the installation site via SMS.

Some features of this app:

Ability to monitor and graphically display events on the software

Enable / disable device control

Control or program any of the device zones through the app

Control and programming the semi-active capability of the device

Ability to contact the device to control the device as DTMF

Ability to register 6 installation locations

Ability to delete a key or the entire remote added to the device

Ability to remove the wireless sensors defined in the device

Ability to reset the factory settings or delete part of the device information remotely

Ability to control electrical devices connected to the device such as motors, lighting and ...

Ability to program and adjust the device through the program without physical presence on the device

Ability to set a new password for the device

Ability to set a one-time password for the device

Ability to specify a manager to access and control the device

Ability to activate device alarm alerts

And ...

If you use the DTMF-Contact feature, you can control the device or be notified of its working status via the following keys.

Key 1: Activate

Key 2: Reactivate to return to active mode (if zones are activated and contact the user)

Key 3: Disable 24-hour zone alarm and return to normal

Key 5: Activate or deactivate the alarm sound

Key 6: Disable

Key 7: Activate the relay

Key 8: Disable the relay

Key 9: Instantaneous relay operation (on and then off)

/ *********************************************** ***** /

Note: The device will only respond to commands sent from the number entered on the device. Therefore, first enter the manager SIM card number in the device and then control the device

This app is able to communicate with other devices as well.

It is also possible for you to customize the application.

In order to set the program and synchronize it with your devices, receive the information of the codes sent and received from the device and the program from the programmer and control your device through the program.